Description
6″ Deep Well Submersible Pump
Brand | Gol Pumps |
Manufacturer’s Warranty | 1 years Limited Warranty |
Ship Weight | |
Service Factor | 1.15 |
Material | Stainless Steel 304 |
Volts | 230 – Three Phase |
In(A)
Imax Istart |
40.2
46.1 156.0 |
HP | 15 |
KW | 11 |
R.P.M | 3450 |
Power factor% (Alloable load)
Power factor% (Overload Factor) |
0.85
0.86 |
Efficiency%(Alloable load)
Efficiency%(Overload Factor) |
79.3
77.7 |
Need Capacitor
Need Starter |
No
Optional |
Cable section (AWG) | 4 x 14 |
Cable length (ft.) | 5.5 |
Dimensions L x W x H (in.) | 5.5 x 5.5 x 28.6 |
Product Weight (lbs.) | |
Production Country | Taiwan |
GolPumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 6” or larger well. The motor is 100% tested before shipment.
Performance Curves:
Selection Chart:
Pump type |
Stages |
Power |
Current (A) |
gal/h I/s |
0 |
3170 | 5283 | 6340 | 7397 | 8454 | 9510 | 10567 |
11888 |
|
KW |
HP |
0.00 |
3.33 | 5.56 | 6.67 | 7.78 | 8.89 | 10.00 | 11.11 |
12.50 |
||||
A6X30CR12/07 | 7 | 9.3 | 12.5 | 17.4 | Head(ft) | 394 | 374 | 344 | 325 | 302 | 276 | 243 | 210 | 161 |
Dimensions and weights:
Pump type |
Stages |
Power |
Dimensions |
Weight(lb) |
|||||||
KW |
HP |
L |
LM | LP | M | P |
Motor |
Pump |
Total |
||
A6X30CR12/07 | 7 | 9.3 | 12.5 | 68 | 31 | 37 | 6 | 5 | 121 | 42 | 163 |
Product advantages
- Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
- High efficiency provides operation cost savings Thrust pad
- Copper wiring
- Pressure equalizing diaphragm
- Removable lead connector
- Control boxes available for single phase motor Standard NEMA mounting dimensions
Technical specifications
- Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap. Max. Immersion depth: 200m
- Protection: IP68
- Nos. of start per hour: max 20 at regular intervals.
- Sand slinger and lip seal.
- Insulation: Class F
- Rated ambient temperature: 30°C with min.
- Cooling flow 0.08 m/s of water flow speed
- Standard installation position: vertical and horizontal
PUMP SPEC:
- Max Head Pressure (ft): 394ft
- Max Flow(Gpm): 200
- Discharge: 3″
- Volts: 230V – Three Phase
- HP:12.5
- Pump Material: Stainless Steel 304
- Pump Model: A6X30CR12/07