Description
6” multi-impeller submersible pump for clean water, designed for pressurization, rainwater re-use, gardening and irrigation in residential building service.
The pump is ideal for use in rainwater recovery systems and to increase the water pressure.
Available as manual or automatic model. The automatic version is a single-phase pump with a float switch for protection against dry running with the need for a control panel. The pump has an in built starting capacitor and the motor has integrated overheating protection.
Equipped with stainless steel debris filter, a non-return valve and a 49 ft power cable with power plug. Renewed to further increase reliability and the ergonomics (the handle has been completely redesigned).The pumps is supplied as standard with a four-section step fitting and a 1″ M/F check valve.
Application
Powerful multistage submersible pump ideal for rainwater systems, operating sprinklers, pumping water from cisterns, tanks, ponds and other applications that require high pressure. Anti-corrosive and dust proof materials, overload protection, wear resistant shaft, anti-debris stainless steel strainer, excellent cooling of the motor allowing the pump to run even if partially submerged, automatic start/stop function with floating switch. Supplied with non-return valve and 4-step fitting.
WARNING
These pumps cannot be used in swimming pools, ponds or basins where people are present, or for pumping hydrocarbons (petrol, diesel fuel, combustible oils, solvents, etc.) in accordance with the accident prevention regulations in force. They should be cleaned before putting them away. See the chapter “Maintenance and Cleaning”.
Flow Rate Maximum: 24 GPM
Max Head: 150 ft
Maximum Immersion Depth: 39 ft
Type of pumped liquid: Clean, free from solid or abrasive substances, non-viscous, non-aggressive, noncrystallized and chemically neutral.
Minimum and Maximum Ambient Temperature: 32°F to 95°F
Maximum Number of Starts: 20/h
Impeller/s Material: Technopolymer
Power Cable with Plug: 49 ft
Possible Type of Installation: Fixed or portable in vertical position
Special Versions on Request: Cables of different lengths, different plug
Technical Data
MODEL |
CODE | ELECTRICAL DATA | ||||||
VOLTAGE |
P1 MAX |
P2 NOMINAL |
In |
CAPACITOR |
||||
KW |
HP | mF |
Vc |
|||||
DIVER 6 800 M-A |
60193031. | 115V/60Hz | 0.95 | 0.65 | 0.9 | 8.7 | 30 | 250 |
Range Performance
Dimensions And Weights
MODEL |
A |
H |
H1 |
Ø |
PACKING DIMENSIONS |
PACKING |
Q.TY |
WEIGHT |
||
L/A |
L/B |
H |
||||||||
DIVER 6 – 800 M-A |
5.9 |
18.5 | 15.7 | 1″ | 9.1 | 7.5 | 19.7 | 0.7 | 40 | 20.8 |