Description
Model | 7060118 |
Brand | Gol Pumps |
Manufacturer’s Warranty | 1 years Limited Warranty |
Service Factor | 1.15 |
Motor Material
Pump Material |
Stainless Steel 304
Stainless Steel 304 |
Volts | 230 – Three Phase |
In(A)
Imax Istart |
9.8
10.6 56.0 |
HP | 3 |
KW | 2.2 |
R.P.M | 3450 |
PF Allowable load %
PF Overload Factor % |
0.73
0.77 |
Efficiency(Allowable load%)
Efficiency(Overload Factor%) |
77.1
77.2 |
Need Capacitor Box
Need Starter |
No
Optional |
Cable section (AWG) | 14 |
Cable length (ft.) | 4 |
Dimensions L x W x H (in.) | 3.8 x 3.8 x 34.6 |
Product Weight (lbs.) | |
Production Country | Taiwan |
Gol Pumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 4” or larger well. The motor is 100% tested before shipment.
Performance Curves:
Selection Chart:
Pump Type |
Motor |
Q capacity 3450 rpm |
||||||||
P2 |
GPM |
0 |
16 |
18 |
21 |
24 |
26.4 |
32 |
||
KW |
HP |
|||||||||
SP-2515 |
2.2 |
3 |
Head in feet |
459 |
380 | 364 | 344 | 325 | 298 | 236 |
Dimensions and weights:
Pump Type |
Motor Dia. |
Dimensions(mm) |
Net Weight (Kg) |
|
A |
C |
Pump |
||
SP-2515 |
4″ |
482 |
98 |
4.1 |
Motor Materials:
- -Upper/Lower Bracket: AISI 304 Over Iron
- -Stator Shell: AISI 304
- -Shaft: AISI 420
- -Seal Cover: Nylon
- -Lip Seal: NBR
- -Diaphragm: NBR
- -Sand Slinger: NBR
- -Lead Wire (Cable): XLPE
- -Bolts and Screws: AISI 304
- -Lead Potting: Epoxy
- -Kingsbury Thrust Bearing: 402J2
PUMP SPEC:
- Max Head(ft): 460
- Max Flow(Gpm): 31.5
- Discharge: 1 1/2″
- HP: 3
- Pump Material: Stainless Steel 304
- Pump Model: SP 2515
Product advantages
- Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
- High efficiency provides operation cost savings Thrust pad
- Copper wiring
- Pressure equalizing diaphragm
- Removable lead connector
- Control boxes available for single phase motor Standard NEMA mounting dimensions
Technical specifications
- Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap.
- Max. Immersion depth: 985 ft.
- Protection: IP68
- Nos. of start per hour: max 20 at regular intervals.
- Sand slinger and lip seal.
- Insulation: Class F
- Rated ambient temperature: 86°F with min.
- Cooling flow 0.08 m/s of water flow speed
- Standard installation position: vertical and horizontal