Description
Model | 7060103 |
Brand | Gol Pumps |
Manufacturer’s Warranty | 1 years Limited Warranty |
Service Factor | 1.25 |
Motor Material
Pump Material |
Stainless Steel 304
Noryl |
Volts | 230 – Single Phase |
In(A)
Imax Istart |
11.4
13.5 52.6 |
HP | 2 |
KW | 1.5 |
R.P.M | 3450 |
PF Allowable load %
PF Overload Factor % |
0.86
0.89 |
Efficiency(Allowable load%)
Efficiency(Overload Factor%) |
66.2
66.8 |
Need Capacitor Box
Need Starter |
YES
Optional |
Cable section (AWG) | 14 |
Cable length (ft.) | 4 |
Dimensions L x W x H (in.) | 3.8 x 3.8 x 36.3 |
Product Weight (lbs.) | |
Production Country | Taiwan |
GolPumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 4” or larger well. The motor is 100% tested before shipment.
Performance Curves:
Selection Chart:
PUMP TYPE |
STAGES | MOTOR | Q=DELIVERY | ||||||||||||||
GPM |
13.2 | 16 | 18.4 | 21.1 | 24 | 26.4 | 32 | 37 | 42.2 | 47.5 | 5.3 |
PUMP |
ELECTRO PUMP |
||||
KW |
HP |
H=TOTAL HEAD IN METERS |
Net Weight(lb) |
||||||||||||||
Single phase |
|||||||||||||||||
ST-3510 | 10 | 1.5 | 2.0 | 298 | 253 | 246 | 236 | 226.4 | 213 | 190 | 157 | 105 | 56 | 4.6 | 35.5 |
Dimensions and weights:
Single Phase Motor Dimensions and Weights |
||||
Pump Type |
Dimensions(mm) |
|||
A |
B |
C |
D |
|
ST-3510 | 483 | RP/NPT 2″ | 98 |
923 |
MOTOR Materials:
- -Upper/Lower Bracket: AISI 304 Over Iron
- -Stator Shell: AISI 304
- -Shaft: AISI 420
- -Seal Cover: Nylon
- -Lip Seal: NBR
- -Diaphragm: NBR
- -Sand Slinger: NBR
- -Lead Wire (Cable): XLPE
- -Bolts and Screws: AISI 304
- -Lead Potting: Epoxy
- -Kingsbury Thrust Bearing: 402J2
PUMP SPEC:
- Max Head(ft): 300
- Max Flow(Gpm): 47
- Discharge: 2″
- HP: 2
- Pump Material: Noryl
- Pump Model: ST 3510
Product advantages
- Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
- High efficiency provides operation cost savings Thrust pad
- Copper wiring
- Pressure equalizing diaphragm
- Removable lead connector
- Control boxes available for single phase motor Standard NEMA mounting dimensions
Technical specifications
- Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap.
- Max. Immersion depth: 985 ft.
- Protection: IP68
- Nos. of start per hour: max 20 at regular intervals.
- Sand slinger and lip seal.
- Insulation: Class F
- Rated ambient temperature: 86°F with min.
- Cooling flow 0.08 m/s of water flow speed
- Standard installation position: vertical and horizontal
Made in Taiwan