Description
Model | 7060236 |
Brand | Gol Pumps |
Manufacturer’s Warranty | 1 years Limited Warranty |
Service Factor | 1.15 |
Material | Stainless Steel 316 |
Volts | 230V – Three Phase |
In(A)
Imax Istart |
24.3
26.7 126.2 |
HP | 7.5 |
KW | 5.5 |
R.P.M | 3450 |
PF Allowable load %
PF Overload Factor % |
0.73
0.78 |
Efficiency(Allowable load%)
Efficiency(Overload Factor%) |
77.4
77.2 |
Need Capacitor Box
Need Starter |
No
Optional |
Cable section (AWG) | 14 |
Cable length (ft.) | 8 |
Dimensions L x W x H (in.) | 3.9 x 3.9 x 66 |
Product Weight (lbs.) | |
Production Country | Taiwan |
GolPumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 4” or larger well. The motor is 100% tested before shipment.
Performance Curves:
Selection Chart:
PUMP TYPE |
STAGES | MOTOR | Q=capacity 3450 rpm | |||||||||||||||||
GPM |
18.5 | 21.1 | 24 | 26.4 | 32 | 37 | 42.2 | 47.5 | 53 | 66 | 79 | 92.4 | 100 | 111 | 121 | 132 | ||||
KW |
HP |
H=TOTAL HEAD IN METERS+2 |
||||||||||||||||||
SP-7012 | 12 | 5.5 | 7.5 | 374 | 351 | 341 | 335 | 325 | 295 | 256 | 200 |
Dimensions and weights:
Dimensions and Weights |
||||
Pump Type |
Dimensions(mm) |
Net Weight(Kg) |
||
A |
B |
C |
Pump |
|
SP-7012 | 960 | RP/NPT 2″ | 98 |
9.5 |
MOTOR Materials:
- -Upper/Lower Bracket: AISI 316 Over Iron
- -Stator Shell: AISI 316
- -Shaft: AISI 630
- -Seal Cover: Nylon
- -Lip Seal: NBR
- -Diaphragm: NBR
- -Sand Slinger: NBR
- -Lead Wire (Cable): XLPE
- -Bolts and Screws: AISI 316
- -Lead Potting: Epoxy
- -Kingsbury Thrust Bearing: 402J2
PUMP SPEC:
- Max Head(ft): 370
- Max Flow(Gpm): 92
- Discharge: 2” NPT
- HP: 7.5
- Pump Material: Stainless Steel 316
- Pump Model: SP 7012
Product advantages
- Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
- High efficiency provides operation cost savings Thrust pad
- Copper wiring
- Pressure equalizing diaphragm
- Removable lead connector
- Control boxes available for single phase motor Standard NEMA mounting dimensions
Technical specifications
- Upper bracket: Cataphoresis treated cast iron plus SS316 cover cap.
- Protection: IP68
- Nos. of start per hour: max 20 at regular intervals.
- Sand slinger and lip seal.
- Insulation: Class F
- Rated ambient temperature: 86°F with min.
- Cooling flow 0.08 m/s of water flow speed
- Standard installation position: vertical and horizontal
Made in Taiwan