Description
6″ Deep Well Submersible Pump
Brand | Gol Pumps |
Manufacturer’s Warranty | 1 years Limited Warranty |
Ship Weight | |
Service Factor | 1.15 |
Material | Stainless Steel 304 |
Volts | 230 – Three Phase |
In(A)
Imax Istart |
22.1
24.2 139.0 |
HP | 7.5 |
KW | 5.5 |
R.P.M | 3450 |
Power factor% (Allowable load)
Power factor% (Overload Factor) |
0.78
0.81 |
Efficiency(Allowable load)
Efficiency(Overload Factor) |
79.9
80.1 |
Need Capacitor
Need Starter |
No
Optional |
Cable section (AWG) | 4 x 14 |
Cable length (ft.) | 5.5 |
Dimensions L x W x H (in.) | 5.5 x 5.5 x 24.7 |
Product Weight (lbs.) | |
Production Country | Taiwan |
GolPumps’ Encapsulated-resin filled motor is developed with market expectation to meet the robust construction and stringent requirement, which is for 6” or larger well. The motor is 100% tested before shipment.
Performance Curves:
Selection Chart:
Pump type |
Stages |
Power |
Current (A) |
gal/h I/s |
0 |
1585 | 3170 | 3963 | 4491 | 5019 | 5548 | 6076 |
7397 |
|
KW |
HP |
0.00 |
1.67 | 3.33 | 4.17 | 4.72 | 5.28 | 5.83 | 6.39 |
7.78 |
||||
A6X17CR07/06 | 6 | 5.5 | 7.5 | 11.3 | Head(ft) | 328 | 325 | 305 | 285 | 269 | 249 | 226 | 200 | 128 |
Dimensions and weights:
Pump type |
Stages |
Power |
Dimensions |
Weight(lb) |
|||||||
KW |
HP |
L |
LM | LP | M | P |
Motor |
Pump |
Total |
||
A6X17CR07/06 | 6 | 5.5 | 7.5 | 52 | 27 | 25 | 6 | 5 | 96 | 29 | 125 |
Product advantages
- Hermetically sealed stator, anti-track, stator resin filled prevent motor burn out.
- High efficiency provides operation cost savings Thrust pad
- Copper wiring
- Pressure equalizing diaphragm
- Removable lead connector
- Control boxes available for single phase motor Standard NEMA mounting dimensions
Technical specifications
- Upper bracket: Cataphoresis treated cast iron plus SS304 cover cap. Max. Immersion depth: 200m
- Protection: IP68
- Nos. of start per hour: max 20 at regular intervals.
- Sand slinger and lip seal.
- Insulation: Class F
- Rated ambient temperature: 30°C with min.
- Cooling flow 0.08 m/s of water flow speed
- Standard installation position: vertical and horizontal
PUMP SPEC:
- Max Head Pressure (ft): 328ft
- Max Flow(Gpm): 123
- Discharge: 2 1/2″
- Volts: 230V – Three Phase
- HP:7.5
- Pump Material: Stainless Steel 304
- Pump Model: A6X17CR07/06